1- Propane high pressure regulator
1- Pol vavle
PROPANE AND NATURAL GAS TECHNOLOGIES
734-992-2648 / E-MAIL matt@pngtechnologies.com
Propane kit contents
1- 3/8" NPT X 5/8" HOSE BARB
1- 20" 1/2 VAPOR HOSE. this is the hose between the seconday KN regulator and carburetor adapter
2- 1/2" hose clamps. For the 20" piece of vapor hose.
1- Low pressure Kn regulator with manual primer button for easy start.
1- power elbow (load block)This is for adjusting the idle mixer.              In is lean out is Rich
1- 3/4" nipple. This will install in the KN fuel inlet to allow you to install the ball valve.
1- 3/4"  ball valve.
1- 3/4" NPT X 5/8" Hose. This will install in the KN fuel outlet to allow you to install the 5/8" hose
1- 46" 5/8 VAPOR HOSE. this is the hose between the secondary KN regulator in let and propane high pressure regulator out let
2- 5/8" hose clamps. For the 46" piece of vapor hose.
2- 1/4" X 2" bolts for mounting the KN regulator to frame
4- 1/4" flat washers for mounting the KN regulator to frame
2- 1/4" lock washers for mounting the KN regulator to frame
4- plastic tie straps
1- Carburetor adapter with fitting
1- Carburetor adapter gasket
2- Carburetor stud exstentions