PHONE# (734) 992-2648
FAX# (734) 992-2746
E-MAIL  matt@pngtechnologies.com
 Forklift LPG Kits
 Generator LPG Kits
 BEAM/IMPCO STLYE PROPANE PARTS
BEAM-202ANLC
BEAM-418-12V
BEAM-120A
Beam Regulator W/ idle 
W/ Vacuum Lockoff
BEAM-202ANL-C
Low Pressure Regulator for Natural Gas
BEAM-T202-RK
Complete Repair kit for 
Beam 202
BEAM-120A-RCK
Complete repair kit for
 Beam 120A
G-SE-1501-L
Beam  3 way terminal replacement 
Vacuum Switch
BEAM-FL418
12 Volt electrick lock-off with filterf
Larger Filter Capacity
G-SE-T60-E
Beam replacement Two-Stage regulator w/ Idle & No Vacuum Lockoff
G-SE-T60-B
Beam replacement Two-Stage regulator w/ Idle & W/ Vacuum Lockoff & Pimer button
G-SE-RBK-A
Repair kit for  Beam T60 /T60E / T60B and Older T50 Units
COMPLETE
 Generator LPG Kits
 Forklift LPG Kits
G-T60
Model T60 Impco/Beam style Series
Regulator with idle and
 vacuum lock-off

$ 88.97
The model T60 is a two stage regulator for LPG applications up to 45 KW / 60 HP application. various models feature a built in vacuum lock-off, Idle adjust and treatment for heating by exhaust gases.   

Fuel type - Liquid/Vapor Propane
Maximum inlet pressure -250 psi
minimum inlet pressure - 30 psi 
Primary pressure - 4.5  p.s.i
BACK VEIW

$79.99
The model T60 is a two stage regulator for LPG applications up to 45 KW / 60 HP application. various models feature  Idle adjust and treatment for heating by exhaust gases.   

Fuel type - Liquid/Vapor Propane
Maximum inlet pressure -250 psi
minimum inlet pressure - 30 psi 
Primary pressure - 4.5  p.s.i
$95.00
The model T60 is a two stage regulator for LPG applications up to 45 KW / 60 HP application. various models feature a built in vacuum lock-off, Idle adjust and treatment for heating by exhaust gases. 
PRIMER BUTTON FOR EASY START  

Fuel type - Liquid/Vapor Propane
Maximum inlet pressure -250 psi
minimum inlet pressure - 30 psi 
Primary pressure - 4.5  p.s.i
BACK VIEW SHOWING PRIMER BUTTON

$49.99
The model T60 Repair kit can be use in the Nolff N-51 , Woodward 51 , Beam T60
Regulators
$378.98
BACK VEIW

BACK VEIW

The model Impco Beam 120A regulator can be used with  any LPG carburetor for application up to 111.9 KW / 150 HP. The 120A is a two-stage regulator and features a built in idle screw. There is also an internal vacuum lock-off which automatically shuts off the fuel when the engine stops  

Fuel type - Liquid/Vapor Propane
Maximum inlet pressure -250 psi
Primary pressure - 5.0  p.s.i
$139.59
The model 120 a Repair kit comes complete with all necessary partsto rebuild your regulator. Also come with instruction
$199.99
$79.99
$49.00
$119.99